[Jewelry making - Article 00141] - Re: [Orchid] Enameling

[Marleen B.Berg]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hallo Shirl,

    If you are enamelling a flat surface you don't need gum, you can
    sift the enamel dry on the clean surface. Works great, only be
    carefull when you bring it to the oven. When you use washed enamel on
    a flat surface you can put it on with a brush, the water helps you te
    spread the enamel. Be sure there is enough enamelpowder on the edges
    and in the corners because it will allways pull back there. Maybe it
    is possible this way? Good luck, 

Marleen.
Marleen B.Berg
http://www.mbberg.com
Aventijnhof 11
6215 ES Maastricht, Nl..


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________