[Jewelry making - Article 00120] - Re: [Orchid] Retipping sterling prong

[JSEllington]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Mark- You are right. I am the one who took and applied the advice.
    No one forced me to do that. I have to take responsibility for it.
    The great thing is that I have learned  things that I would never
    have happened upon without the mistake happening. The more I think
    about this, the more I learn from it. If the Stop Ox was not the
    culprit, then I surely must've gotten some Cupronil on the stone
    without meaning to and without knowing that that would be a problem. 

    Anyway, the benefits of the lesson learned this time around sinked
    in deep. I am grateful to all of you who responded and to the Rio
    personnel for this interaction. 

J. Sue Ellington


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________