[Jewelry making - Article 00113] - [Orchid] I need some CAD models made

[Laurie Cavanaugh]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hi, all,

    I've been blithely skimming by the various CAD-related discussions,
    as I'm nowhere near the point of doing that myself. Yesterday it
    occurred to me, though, that the models for my new line idea were a
    perfect candidate for generating by either one of those solid
    'printers' or a computerized milling system. My idea is for a set of
    five to seven charms that are highly geometric, and the precision of
    the geometry is important to the design. I'd rather support an
    Orchid member than just look in the phone book, so if you are
    interested in model-making a few charms, please contact me off-list. 

Thank you in advance,
Laurie Cavanaugh
Acanthusleaf Designs


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________