[Jewelry making - Article 00021] - Re: [Orchid] Casting sheet silver

[Dave Arens]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>           I've considered cuttlefish casting, but I need large areas
>     of sheet, possibly up to 30cm x 20 cm.  It seems I might not be
>     able to do this then.  Maybe I'll get in touch with an industrial
>     company who cast sheet, and see if they have any ideas. 

    When Barb mentioned sand casting, that got me to thinking about
    Delft clay. 

    If you got a a metal baking pan about the size you need, you may be
    able to pack the clay into it & impress or carve the desired
    inscription in the clay. 

Dave


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________