[Jewelry making - Article 01028] - Re: [Orchid] Fine silver

[Donna Wilson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>      My question is whether or not a tabletop kiln used for enameling
>     would be suitable for granulation as well. My second question is:
>     If I get the ultralite for granulation purposes , should I coat
>     the firing surface with kiln wash similar to what I use for my
>     other kilns?  


    Alma, I have one of the small kilns I use for granulation, no need
    to buy a new one, just use the one you have. Since I'm not using it
    for enameling and don't use anything that would cause a mess on the
    surface, I haven't used kiln wash. Some of these small kilns have
    exposed elements and you don't want to get kiln wash on them. 

Donna in VA


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________