[Jewelry making - Article 01020] - Re: [Orchid] Propane tank with acetylene regulator

[Thackeray Taylor]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Ken,

    As long as you can find adaptors for the internal threaded (female
    fitting) acetylene regulators it's no problem. However if you have a
    510 type regulator "external threaded" (male fitting) it will fit the
    tank. Just remember, acetylene regulators to propane tanks no
    problem, propane regulators to acetylene tanks can work but is unsafe
    and is not recommended. One more thing, please remember all the
    safety issues involved with propane tanks inside. Hope this helps 

Thackeray Taylor
Rio Grande technical support


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________