[Jewelry making - Article 01008] - Re: [Orchid] Propane tank with acetylene regulator

[YUKHAN]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     You need to get an adapter, since the threads on the regulator
>     won't Fit the propane tank. 

    Hi, My regulator was set up for large acetylene tanks and the
    threads were the same as the propane, I would suggest a smaller tank
    maybe a five lb..  But propane is much cleaner then acetylene.
    You'll need a larger tip for your torch then acetylene. 

ROBERT L. MARTIN
Gold Smith / Diamond Setter 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________