[Jewelry making - Article 00957] - [Orchid] Mold anything

[D M]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have read a couple of posts relative to Castaldo Liquacast and
    although I found it to be easy to work with, the molds just don't
    last in this humid climate. Urethane likes to revert over time and
    the molds end up stuck closed. Storing in poly bags helps for a
    while, but poly breaths, so moisture still gets in. 

    Akron RTV by Zero-D Products is a silicone. As such, it costs more,
    but is permanent. It is clear and just the right firmness. The tear
    strength is amazing. You will need some method to vacuum the mix
    though. 

    You can get this product by calling 800-382-3229 or 440-942-5005. fax
    is 440-942-2130. Good luck! Craig M. 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________