[Jewelry making - Article 00942] - Re: [Orchid] Propane tank with acetylene regulator

[Dan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>        is it possible to use an acetylene regulator on a standard BBQ
>     propane tank?

    I have heard it said that that is allowable, but I have never done
    it or seen anyone using it as such. You will probably need to get
    some fittings to go from the propane tank to the regulator which
    should be easy.... Just propane to the appropriate iron pipe size on
    the regulator. (The fitting should be made out of brass.) Don't
    forget to make sure the hoses are rated for propane I think it is
    type"T". 

Dan Wellman
Speedway IN 
Where the formula one race runs tomorrow


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________