The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Keum Boo  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Alma Rands
Date: Mon Sep 22 23:09:52 2003
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have never tried keum boo on rings, but have used it often on
    bracelets and it seems to wear very well.  I roll out my own to
    about 36 gauge ca n't get it any thinner with my rolling mill. This
    gauge is a bit heavier tha n the kind  I got  from Komelia Okim when
    I took her  workshop, but it wo rks just fine. I have tossed  it in
    the tumbler with steel shot, and  brushed it gently with  a brass
    brush to reduce the glare, and the  gold has held up just fine.  I
    wear one of the bracelets most of the time. This little tidbit may
    amuse some of you.,. but  the  first time I tried to roll out the 24K
    piece of gold, I got it down to 36 gauge  and  thought I could get it
    thinner. Nothing  worked.   I tried sandwiching it between all kinds
    of paper and only succeeded in tearing the paper. Tried the o ld
    copper trick just got thinner copper,and the gold still remained at
    36 gauge.  Then I decided to  roll two pieces of the 36 gauge
    together, thinking they would reduce in thickness.    Ha,  All that
    happened is tha t they fused together totally, so it was back to
    reducing the now thickened piece.  it had cracks, and air bubbles,
    but to my delight they all healed , after repeated rolling, and the
    bubbles worked their way out, after being pierced with a sharp needle
    and then rolled again..   Just adding this little bit of information
    in case any one is interested in what happens w hen two pieces of  36
    gauge gold are run together thru the mill.  Alma,  in 
    still sunny Portland, Or. where the roses are still blooming.


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project