[Jewelry making - Article 00784] - Re: [Orchid] RT Blanking system

[Polymaid]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have an RT System and I have used it quite successfully.  The
    instructions are easy to understand and when you cut the steel at
    the correct angle with the correctly sized blade, it works well.  I
    do not do high production work, so this is sufficient for me, at
    least at the present.  It is true that the blade system that they
    devised is not the easiest - it is manually operated by moving the
    blade up and down, holding the die in place.  It helps to use a
    lubricant on the blade for faster cutting, less hang ups and more
    accurate cuts. 

    Linda Gertsch in the Fabulous Adirondacks where the  leave are
    changing day by day.  If ever you want to see one of nature's most
    impressive displays get up here in the next couple of weeks!!!


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________