[Jewelry making - Article 00703] - Re: [Orchid] Flexible-shaft tools

[SoulOfWood]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Best thing to do is either buy the foredom, or one of the other top
    machines (frei, borel,, etc) foredom: 

    S, is the basic 1/8 hp setup CC,, basic 1/10 hp setup TX ,,(1/3hp/high
    torque)is top of the line TXH high torque, heavy duty, for dense
    materials carving L,, high torque/low speed DO NOT USE THEIR ECOMOMY
    FOOT PEDAL,, (or at least upgrade),,, the FCT or SCT is the ONLY way
    to go BEST IDEA; Wasit for the machine to come up on orchid,,, we
    have them for sale very regularly,,, i have bought 2 in the last 4
    months, and there were many more than that,,, recently 
    DrDule1 AT aol.com,, had many tools,, try him. E-mail Address(es)



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________