[Jewelry making - Article 00557] - Re: [Orchid] Regulators and a propane gas line

[Jim Reitze]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    When I had a setup like that in my home (previous life), I just ran
    an extra line from the household service.  Had one of the large tanks
    outside with lines going to a cook stove and spa heater.  Had the
    company tee another line into my shop, ran my torch off that, no more
    regulators at the torch end.  It was simply the line pressure from
    the outdoor tank, and it was more than adequate. Jim


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________