[Jewelry making - Article 00044] - Re: [Orchid] CAD/CAM stuff

[Dubiel Design Studio]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    To all those using CAD/CAM software and systems, I have a few
    questions and would like your opinions. I am relatively new to the
    jewellery field, making hand carved wax models and some custom
    jewellery. However in my prior career, before being downsized, I did
    have some hands on experience with 3D CAD/CAM systems on much larger
    scale items. 

    1 - As far as I know, there are 3 basic CAD systems developed and
    used in the jewellery field. Jewelcad, Artcam and Rhino (with
    Gemvision's Matrix enhancements). I have downloaded trial versions
    of Rhino & Jewelcad, and seen Matrix operate at a trade show. What
    are your unbiased opinions of each of these packages and which do
    you prefer to use? 

    2 - Or does each have a specific application that it is best at? 

    3 -What has the support been like from each of these software
    developers? 

    4 - In terms of producing an actual model, can a 4 axis milling
    machine produce similar pieces to other RP machines such as
    SolidScape's T66 or other types of RP machines? 

    5 - Has anyone had any experience with Gemvision's Revo540 milling
    machine? 

    6 - Those with both a CAD and CAM system in-house, has your work
    been primarily for your own use, or do you operate as a service
    bureau? 

    7 - Those that send CAD files to a service bureau, do you have long
    lead times? Is there a shortage of service bureaus? 

    I would be grateful in receiving responses either on or off list.
    Kindest Regards, 

Richard Dubiel



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________