[Jewelry making - Article 00247] - Re: [Orchid] Injection Wax Prefferences

[Jewelers Gallery]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>      I am after a reliable all round wax that can be carved, filed and
>     smoothed off if needed. Any insight would be greatly appreciated.
>     Ray Lees 

    Ray, I use Kerr Ruby Red injection wax. I do a lot of customizing
    and adding to or removing 	of injected waxes. Also, here in Denver
    Colorado, in the winter there have been waxes that once shot, would
    not sustain overnight fluctuations in temp, never lower than 60
    degrees, but would be 	so brittle they could not be handled 
    without shattering. Richard Hart


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________