[Jewelry making - Article 00179] - [Orchid] Introducing - Jeffrey Everett

[jeffrey]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========



HI all

    I used to be a regular on this list up until about 1998 or so. I
    left the list because of an increased work load. Some here may
    remember me, as I was a prolific poster. 

    I've been working at the bench since 1971 and have worked in all
    phases of the business, with specialties in fabrication and setting,
    but have LOTS of experience with waxing, casting etc... 

    For the last 10 years I've become heavily invested into CAD/CAM, 3
    axis milling, and Rapid Prototyping, which I believe represents a
    large part of the future for this industry. Just in case you'd like
    to know what programs I use, I use Rhino for my 3D design program,
    and VisualMill for my milling program. 

    I'm interested in joining into discussions about the above. 

Best regards to all
Jeffrey Everett

** Hanuman's Resopnse - Welcome back Jeffrey! **


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________