[Jewelry making - Article 00104] - Re: [Orchid] "Stand up" Jewelry

[Bethkatz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have found that the best way to hold the object to be photographed
    is to use a hot glue gun and put a small dab of the glue on the
    surface, you have a small window of opportunity as to how to place
    the object "just so", but enough time to get it at the angle you
    want to have.  The glue, once solidified, holds the object sturdily
    and you can even move the base to change the angle of the object
    being photographed.  When finished, the glue simply pops off,
    leaving no marks or residue. This also works very, very well on
    glass as it is almost colorless and does not create shadows. It
    works equally well with both the hot melt glue and the low melt
    glue. Beth Katz


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________