[Jewelry making - Article 00018] - [Orchid] Polishing using Swansdown mops and Rouge

[Richard Whitehouse]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========



    Hi All, I like to finish my work to a high finish, which involves
    using Swansdown mops and Rouge. Using this method of finishing
    creates considerable red dust which gets into everything! I sue an
    extractor to get rid of the loose mop threads and the rouge. This
    doesn't get rid of all the dust. Can people recommend how much air
    movement from the extractor is needed to remove all (or nearly all)
    of the Rouge dust and loose polishing threads? Many thanks Richard 




____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________