[Jewelry making - Article 00972] - [Orchid] Polishing resing inlay work

[Janine A Beaudette]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    First I would like to say what a wonderful forum this is for fellow
    jewelers to gain insight and tips on their craft. 

    I've recently started working with resin, I have no problem with the
    curing or adding opaqe colors to it. My problem is how to polish it.
    I find that the exposed side of it needs sanding or polishing to have
    the same glossiness of the other sides particularly when pigment is
    used. I'm not quite sure of what products or tools to use. Perhaps
    there's even some step that I'm missing that could prevent this in
    the first place. Any suggestions? 

Thanks,
Janine Beaudette


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________