[Jewelry making - Article 00948] - [Orchid] Quick change handpiece advice

[Spike]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have a Techno from when they were first introduced to the American
    market. I have had a few collets break over the years, but I still
    have it and use it occasionally. The handpiece I use most now is a
    Ney T-flex, and it is the hands down best handpiece I have ever
    used. I have never had an off-sized burr shank not work. It has
    excellent concentricity and is smooth and quiet. It must be stopped
    before you can open it, though. 

Spike Cornelius
Portland, Or.
RC ArtMetal


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________