[Jewelry making - Article 00936] - [Orchid] Repairing a braclet

[ricetom]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I am repairing a braclet for a friend because several stones had
    fallen out. The stones apparently were foil backed.  I need to find
    someone who can tell me what I need to do to get the stones I cut to
    work.  I used quartz (very small), I glued them in the braclet, and
    I did not know that the other stones were backed with foil until
    now.  I unglued the stones, and I am waiting to find out what I
    should do to make these stones look normal.  Any help would be
    appreciated. 

Anna Rice,  ricetom AT prodigy.net


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________