[Jewelry making - Article 00697] - [Orchid] Sherline CNC milling

[Les Brown]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Belinda,

    Try going to www.sherline.com.  They manufacture a fairly well made
    line of lathes and mills which are compatible with CNC work.  They're
    now offering a complete CNC mill, and may have the lathes set up with
    CNC also  They are also very helpful if you call them.  Sherline is
    well established and American made - which means parts are just a
    phone call and day away. 

Good luck,

Les Brown
L.F.Brown Goldwork, Inc.
17 Second St. East, #101
Kalispell, MT 59901
406-257-1129
Les Brown
L.F.Brown Goldwork, Inc.
17 Second St. East, #101
Kalispell, MT 59901
406-257-1129



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________