[Jewelry making - Article 00530] - Re: [Orchid] Polishing cabinet advice

[Nicolaas Alexander Ltd.]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I think your making a dangerous mistake using a 3/4 horse polishing
    motor, 1/4 horse is plenty and probably won't remove a finger when
    you have that momentary lapse of consciousness when polishing a
    chain... There is no reason to need that strong a motor if you stall
    it you obviously are doing something wrong, We have four jewelers in
    our shop and the polisher gets used all day without problem. Karel


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________