[Jewelry making - Article 00516] - Re: [Orchid] Plating Racks

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>         We have electroform plating racks with threaded post & PVC nuts
>     with rubber sealing washers. The washers are worn out & need to be
>     replaced however the rubber I have tried so far the plte migrates
>     onto the washer & has to be picked off after 1 rack. Any ideas on
>     what kind of material could be used for this purpose wuld be
>     helpful. 

    I'm not real clear on the exact construction of your racks -
    www.plastidip.com (Plasti Dip International) carries the rubber that
    plier handles are coated with - among many other things - it's a 
    consumer product, not 55gal. drums only.


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________