[Jewelry making - Article 00450] - Re: [Orchid] Wax Injecting issue

[Carlos]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I took all of your guy's advice and lowered my wax temp to just above
    melting and I also used talcum powder on the mold and they are now
    comming out great. Thanks a ton. I never would have thought that
    lowering wax temp would make a better model but it does. I guess i am
    kind of a all out guy I tend to turn everything up to the max setting
    and heat the hell out of it but in this industry that doesn't exactly
    work. Thanks again for all of your help folks. 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________