[Jewelry making - Article 00350] - [Orchid] Wax Injecting issue

[vovin]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Ok to start off I have to say I am totally new to casting I have
    been practicing and I am having a issue with injecting wax into my
    rubber molds. I use a hand pump to inject the wax ( The cheap wax
    injector from swest) anyway when i inject the wax there's a place
    where some raised letters are. These do not fill with wax. so I get
    a wax model that looks good but the letters are mostly missing. What
    can I be doing wrong? I also have alot of trouble with the wax
    sticking like glue to the rubber. Any help would be greatly
    appreciated. 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________