[Jewelry making - Article 00339] - Re: [Orchid] Tumble polishing silver

[Andy Kroungold]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Wendy, I believe steel is a better way to go. The one thing the pc
    should be smooth for a bright finish. As well please note depends on
    the amount of pcs you tumble at one time. You don't want them to hit
    each other. 

    Andy "The Tool Guy" Kroungold Sales/ Tools and Technical Stuller Inc.
    337-262-7700 ext. 4194 337-262-7791 fax andy_kroungold AT stuller.com


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________