[Jewelry making - Article 00322] - Re: [Orchid] Casting plastic toys

[marco mandragon]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     i build superbike and GP models, and if i am going to replace the
>     fork tube, i put a rod in my flexshaft and spin it while i apply a
>     file, it works like a cheap little lathe, then sand and polish and
>     coat in clear lacqure (sp) and you have some really cool forks. PS
>     I race Bikes too. 

    Hi Aaron Very interesting . I love bikes too. I have built and
    modified some micro machines bikes. One is a Yamaha superbike and a
    Suzuki. My dream is to cast the perfect Harley Davidson, I already
    made a fat boy out of a micro machine the problem is that the parts
    made of rubber don't burn out good and I have to make it by hand.
    Right now I'mtrying to design a custom drag bike with preexistent
    micro machine parts. I'd love to see the ones you have made. 

P.S I race bikes too. (in my imagination)
Marco


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________