[Jewelry making - Article 00185] - Re: [Orchid] Retrofitted a motor to a rolling mill?

[Larry Bima]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Charles, I fitted a washing machine/tumble drier motor to my
    Durston.The handle was unscrewed, and replaced by a large diameter
    pulley, with a small pulley on the motor. 

    You need access to a fitter/turner to modify the pulley to fit the
    mill. 

	I'll email pics offlist.

Regards
Larry


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________