========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
David, I clean my fine files with brass as well. I use square stock
(or round rod squared on the end) then put a sharp angle on the end,
pushing this sharp edge into the file. As long as you go with the
same angle as the grooves, it will clean all debris. When the brass
point becomes too dull, just file a new angle. For more QuickTips,
go heRe: http://www.silversmithing.com/1quicktips.htm
Jeff Herman
Jeffrey Herman Silver Restoration & Conservation
PO Box 72839
Providence, RI 02907
Tel: 401/461-6840
Fax: 401/461-6841
E-mail: restore AT silversmithing.com
Web: http://www.silversmithing.com/silver
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
