[Jewelry making - Article 00158] - Re: [Orchid] Anvil, flexi, polisher

[Dubiel Design Studio]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    A solution I prepared in building my own polishing lathe to
    eliminate noise was to use a bathroom exhaust fan with a fairly
    decent cfm (110 cfm) mounted to the back of a home made hood. A
    furnace filter was placed between the inlet at the back of the box
    and the fan. Try to find a fan with a squirrel cage versus an axial
    fan - tends to work better. Richard Dubiel 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________