[Jewelry making - Article 00078] - Re: [Orchid] Anvil, flexi, polisher

[Kofoed Design]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     For those who are interested in my cheap grinder/polisher setup,
>     I've posted a set of pictures on my website, along with a copy of
>     my writeup on how it was made. 

    Aha! What I was doing wrong with mine, besides the noisy shop vac,
    was to enclose the whole polisher in a box, rather than just the
    spindle with the polishing wheel. On the other side I have a large
    cratex wheel which doesn't produce all that much dust. Your setup
    looks much more efficient. I think I'll shop for a quieter shop vac
    and redo my setup more like yours. Thanks! 

Janet Kofoed


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________