[Jewelry making - Article 00066] - Re: [Orchid] Anvil, flexi, polisher

[NatnDan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>      The shop vac is VERY noisy. I have to wear ear plugs. Maybe I
>     should just get a quieter shop vac. Are there such things? Karen,
>     is yours that noisy? 

    I built a box with a door on it that my shop vac sits in. Leaving
    about a half inch gap all the way around at the bottom for air. Not
    sure if the gap is needed or not.   But it lowered the noise by over
    half.. 

Daniel Hamilton 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________