[Jewelry making - Article 00037] - Re: [Orchid] Anvil, flexi, polisher

[Karen Goeller]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Janet, Mine isn't horribly noisy, but I got the smallest one they
    have.  If it bothered me terribly, I suppose I could enclose it in
    some kind of sound-soak box or get an extension hose and move it
    further away.  Just hasn't been an issue for me at this point. 

    I should have also mentioned that I plugged them both into a
    switched outlet/strip, so they turn on/off at the same time.  But I
    can also run them separately if I need to. 

    The grinder itself is VERY quiet, by the way. 

Karen
kgoeller AT nolimitations.com
http://www.nolimitations.com
Handcrafted and Unique Artisan Jewelry


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________