[Jewelry making - Article 00012] - Re: [Orchid] 3D Wax Printer

[HARPR002]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>           I am aware that there are these so-called 3D wax printer or
>     model makers on the maket. One that comes to mind is the Model
>     Maker II from a company called SolidScape in the Sates. Would any
>     one know of any other     comparable device from other
>     manufacturers currently available? 
 

    Peter, Try Facet Manufacturing, in
    Queensland...http://www.facetmanufacturing.com.au 

    No direct exerience with them, but I think they can probably help. 

Regards
Peter Harris, Adelaide


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________