[Jewelry making - Article 00094] - Re: [Orchid] MC Regulator Troubles

[Noel Yovovich]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========



    it seems to me that if this were true, the regulators in the places
    I teach wouldn't last a week. Everything in these classrooms gets
    abuse, but we've had the same regulators forever. 

    I'm a little puzzled by the replies to this problem. If the pressure
    creeps up, doesn't that *have* to mean that the main tank valve is
    leaking? If the tank is truly shut off, how can the pressure
    possibly rise? That's not a regulator issue, it's a tank valve
    issue. Or am I missing something? 

Noel



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________