[Jewelry making - Article 00026] - Re: [Orchid] Best adhesives

[Joel Schwalb]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Raphael, I would use an epoxy adhesive, especially since the one of
    the two surfaces is not perfectly flat. Epoxy will fill the gaps. It
    is important that both surfaces are absolutely clean. I think that
    you will find that you will get the strongest bond with epoxy. Joel
    joel4 AT optonline.net www.schwalbstudio.com 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________