[Jewelry making - Article 00002] - Re: [Orchid] Tricky soldering question - heat sink?

[coralnut]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Sparrow,

    Sorry to hear of your problems.  Sounds to me like you need to get
    over to your nearest jewelry equipment supplier and get the tools and
    supplies you need.  I don't know the relative value of the piece you
    are trying to work on but, if it is worth doing the work, it is worth
    doing it well and that requires the proper tools.  Anything less and
    you could destroy it or create a less than quality item. OH, and I
    would stay away from 'that somebody' too!! 

    Cheers from Don at The Charles Belle Studio in SOFL where simple
    elegance IS fine jewelry! dcdietz AT attbi.com 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________