[Jewelry making - Article 00767] - Re: [Orchid] Backing Moonstones

[Manwithtorch]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Sandra, hope this helps. I use Tester's model paint (a small drop
    from a toothpick) to add to my 5 Minute Epoxy to make background
    cushions for moonstones & opals. One note however, if the moonstone
    is gem quality (no inclusions), I paint directly on the metal & use a
    thin gauge wire to form seat so stone does not make contact with
    base.  Otherwise the stone acts as a magnifyin g glass and makes the
    stone look fake.  If you mix it into your epoxy, be s ure to start
    with one small drop of paint at a time until you get the color
    preference.  I'm sure there is probably a limit on how much paint
    you can mix in but I am able to get dark colors without affecting the
    epoxy's curing (usually two to three small drops). I have always used
    Tester's paint only because I can get a variety of colors in small quantities.  
    Michael


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________