[Jewelry making - Article 00352] - Re: [Orchid] [Source] Spring Wire?

[Michael R. Mathews Sr.]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hello Marcus:

>         Does anyone know where I can purchase some  0.1 - 0.3 mm gauge
>     spring wire that will not lose its spring after heating? 

    To my knowledge, there is no steel wire that will not loose its
    spring when heated. I have recently heard about a platinum alloy wire
    that is supposed to put up with heating and remain springy. I know
    that R-Findings is using it in some platinum findings. I hope this
    helps you. http://www.rfindings.com/rproducts.html 3300 Monroe Avenue
    Suite 345 Rochester, New York 14618 (585)385-6730 Toll Free
    (800)422-7624 FAX (888)243-5484 

Michael R. Mathews Sr.




____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________