[Jewelry making - Article 00233] - Re: [Orchid] Separating iron from gold powder

[Watchman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     If I were you, I'd try a magnet. Get the strongest magnet  you can
>     find. 

    This is exactly the method I would use BUT I would put the magnet in
    a small polythene bag. This keeps the magnet and the iron away from
    each other so that you don't have to spend hours trying to remove the
    irn dust from the magnet. When you have done, you simply take the
    magnet out of the bag and the iron dust falls away. 

Best wishes,
Ian
--

Ian W. Wright
Sheffield, UK



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________