[Jewelry making - Article 00119] - Re: [Orchid] Resists for etching silver - paint pens

[ARands]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Noel.  you mention going over the PNP  image with a "paint pen."
    What is a paint pen???    Could you be more specific---brand name
    etc.  I had some PNP copies made at the local Lazerquick, but they
    came out full of pinholes.  I contacted the PNP manufacturers and
    they informed me that the copies had probably been made on the new
    copiers which colate etc. These are  not as good for our purposes as
    the older type machines.     I would like to salvage the ones I have
    had made---all 15 copies, by going over them with some resist, and
    your mention of a" paint pen " sounds like a perfect solution, but I
    don't know what  kind of pen you are referring to.. Thanks for your 
    help. Alma


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________