[Jewelry making - Article 00066] - [Orchid] Clay for wax casting

[Robert Powell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Clay for wax castings 

    Have You considered using Jett Sett ? I had purchased another pound 
    to use as a mold. Place the Jett Sett into a jar cap of the right
    dimension (heat the stuff in 180 degree water ) Then place into a jar
    or cap of metal. Press the original model into the Jett Sett and let
    it cool. 

    You can pour hot wax into the mold or use some wax sheet or boxing
    wax . Let the hot wax cool completely before removing it. It does not
    take a lot and a pound goes a long way. I have purchased the Jett
    Sett from either Rio Grande, or Swest . 

ROBB
Do not mistake CIVILITY for SERVILITY


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________