[Jewelry making - Article 00049] - Re: [Orchid] Transferring design

[Dawn Hale]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Here is a suggestion for transfering designs. Draw your design onto
    Address labels used for computer printers. They come in various
    sizes. Peal off the protective strip on adhere the paper with the
    desing onto your metal. The label should remove easily, and any
    residual adhesive can be cleaned up with solvent 
    like Orange Glo, etc.. Good luck


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________