The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Tools maintenance tips  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Ken Kotoski
Date: Tue Apr 01 22:49:57 2003
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    It's maintenance time It's the begining of the month so don't forget
    to: 

    1) Blowdown your boiler type steamers and fix any leaks. 

    2) Get your handpieces tuned up if they are having problems, like
    vibrating or getting hot. 

    3) Make sure your flexshafts are properly lubricated. Replace
    brushes/shafts/sheaths if needed. 

    4) Drain the water/oil and flush your vacuumm pumps. Change damaged
    hoses. Clean/replace any filters. Replace gauges. 

    5) Make sure your pyrometers/oven/oven controllers are calibrated. On
    electric ovens with exposed elements, check for any hot spots. If any
    are visable order a new element to have on hand when the one in the
    oven goes bad. 

    6) Check the oil in your air compressor and drain the water, change
    air line filters and desicant if needed. Fix any air line leaks. 

    7) Check all connections on your torches for tightness and hoses for
    wear. Replace worn hoses, o-rings and damaged fittings. 

    8) Wipe down your ultrasonic with a water dampened cloth (this should
    actually be done every day). 

    9) Wipe down your tumblers with a water dampened cloth. 

    10) Check your ventilation system for proper suction. Clean or
    replace filters. 

    11) Clean your buffing station including the motor. 

    12) Check calibration on scales. 

    The most important item here. 

    13) If there are signs of wear or a problem is starting to appear get
    the equipment fixed now. It will cost much less now than waiting for
    the equipment to completely stop working. 

    For more detailed explanations on how to perform any of these
    functions let me know and I will be happy to help. 

    Your friendly repair shop in Montana. 

Ken Kotoski
MPG Repair
www.mpgrepair.com
1-877-262-2185


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2007, The Ganoksin Project