[Jewelry making - Article 01102] - [Orchid] Pepe mills

[MSan40]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Dear Orchidians, I purchased a Pepe combo mill from Tevel at
    Allcraft last year after the much more expensive one I bought from
    Contenti broke. The Contenti one had some sort of gear ratio thing
    as opposed to the Pepe which is more direct gearing down. I don't
    really know the mechanics behind it so can't explain it properly.
    Also with the Contenti model in order to use the square wire rollers
    it required a complete disassembly of the mill which to a mechanical
    idiot like myself looked absolutely impossible. I have used my Pepe
    with great results and am Very happy with it. Call Tevel and ask him
    for one at Allcraft in NYC. 

all the best, 
Mark Sanne
Aurea Jewels
16 McGuirk St. 
East Hampton, NY 11937
aureajewels AT aol.com



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________