[Jewelry making - Article 01017] - Re: [Orchid] Question Paste Solder

[Linda Walsh]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Theresa, Great that you're getting started up again! Hauser and
    Miller's website says that it's solder is available in sheet, strip,
    paste or wire, and lists easy, medium and hard silver solder.  I
    don't know if all temperatures are available in all forms, but it
    might be worth a shot. I have had some success in rejuvinating gold
    paste solder by putting it in my toaster oven at LOW temp (200
    degrees or less) for a very short time.  I test often to see if
    anything will come out when the plunger is pushed, and declare
    victory when it does.  In my experience, this can be done
    successfully only a limited number of times. Hope this helps Linda


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________