[Jewelry making - Article 01003] - Re: [Orchid] Making handmade chains

[Marilyn M. Smith]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    If you have cleaned up the chain well, you should get a nice shine
    with burnishing solution and stainless steel shot in your tumble. I
    do not advise spending the money on shot that is not stainless. If
    you have scratches and blobs of solder though, all you will have is
    shiny scrated and blobbed chain links. 

    Congratulations on completing a first project! 

Marilyn Smith


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________