The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Rolling Mill  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Laura Wiesler
Date: Sat Mar 22 00:38:59 2003
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Nancy -- I bought a rolling mill just two years ago -- No -- your
    folding table is not stable enough!!  Not only will it need to
    support the weight, but you will also find that there is a great deal
    of "movement" that you would have as a result of the work of rolling
    out metal.  I also have a workbench like you mentioned and I decided
    not to use it. The top is not level or smooth and since you'll have
    to bolt the mill down to the surface, it could be difficult to
    position it in such a way to not have the bolt holes fall between the
    slats.  I have also found that the wood in mine has warped over the
    years in the humidity that we have here in the Mid-Atlantic states. I
    went to Grangers and purchased a metal bench with a one inch thick
    particle board top (I guess that's what you would call it).  It is
    perfectly flat and won't warp, solid so that I could run the bolts
    through anywhere, and the bench was structured to hold a fairly
    substantial weight, so that it can handle the work.  I also later
    bought a shear and have that on the other end. . (you can always find
    something to take up the extra room). . . 

Laura
StoneHouse Studio


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project