The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Using the burnisher  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Beth Rosengard
Date: Fri Mar 21 22:34:12 2003
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     Could you please elaborate on why not to use the burnisher? By the
>     way, I never like my bezel settings. 

    There's nothing wrong with using the burnisher except that it's slow
    and, in my opinion, harder to get a really smooth finish than with
    other methods. You have to find what works best for you and since you
    say you don't like your bezel settings, you may do better with
    another method. 

    I use both a bezel pusher (for corners, if they exist) and a bezel
    rocker to set the stone.  Then I remove all marks with a
    silicon-impregnated wheel on the flex shaft.  Finally I "polish" the
    bezel with a brass bristle brush on the flex shaft.  Yes, this puts
    minute scratches in the metal but it shines it up just fine.  No
    tripoli.  No rouge.  About the only time I go near my buffer any more
    is if I want to touch up a stone with Zam. 

    This method works for me though it may not work for you, especially
    if you want a mirror finish.  (You can see the results I get on my
    Orchid Gallery page, though the image resolution isn't great.)  I'm
    sure others will post additional methods that you can try. 

Beth



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project